2دانشیار، گروه صنایع چوب و کاغذ، دانشگاه آزاد اسلامی واحد علوم و تحقیقات تهران
3استاد، گروه صنایع چوب و کاغذ، دانشکده منابع طبیعی و محیط زیست، دانشگاه آزاد اسلامی، واحد علوم و تحقیقات، تهران.
4دانشیار، گروه فرایند، پژوهشگاه پلیمر و پتروشیمی ایران، پژوهشگاه فرایند، تهران
5استادیار گروه علوم و صنایع چوب و کاغذ، دانشگاه آزاد اسلامی، واحد علوم و تحقیقات تهران
چکیده
با توجه به افزایش آلودگیهای زیست محیطی ناشی از تجمع ضایعات و زبالههای حاوی پلیمرهای نفتی پایدار، جایگزین نمودن این پلیمرها با استفاده از پلیمرهای زیستی و اصلاح مشکلات و کمبودهای آنها در فرایند تولید و در محصولات نهایی امری بااهمیت میباشد. در این پژوهش به بررسی امکان تولید چندسازه پلیلاکتیک اسید-پوسته شالی با ویژگیهای قابل قبول و همچنین تاثیر استفاده از پرکنندههای معدنی کندسوز کننده آلومینیوم تری هیدرات (ATH) و هیدروکسید منیزیم (MDH) برروی خواص فیزیکی و حرارتی چندسازه تولیدی پرداخته شده است. نتایج نشان داد که دانسیته چندسازه پلیلاکتیک اسید-پوسته شالی نسبت به چندسازههای ساخته شده با پلیمرهای پایه نفتی پلی پروپیلن (PP) و پلی اتیلن دانسیته بالا (HDPE) بیشتر بود و افزودن پرکنندههای معدنی کندسوز کننده سبب افزایش دانسیته چندسازه شد. همچنین افزودن پرکنندههای معدنی کندسوز کننده سبب کاهش میزان جذب آب و واکشیدگی ضخامت آنها گردید بطوریکه از این لحاظ با نمونههای حاوی پلیمرهای پایه نفتی قابل قیاس بود. نتایج آنالیز وزنسنجی حرارتی (TGA) نشان داد که افزودن پرکنندههای معدنی کندسوز کننده سبب کاهش دما در محل پیکهای افت وزنی چندسازه و همچنین ملایمتر شدن شیب افت وزنی نسبت به افزایش دما شده است.
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite
نویسندگان [English]
Yashar Einollahi1؛ Amir Hooman Hemmasi2؛ Habibollah Khademi Eslam3؛ Esmaeil Ghasemi4؛ mohammad talaeipour5
1Islamic Azad University employee
2Prof., Department of Wood and Paper Science, Tehran Science and Research Branch, Islamic Azad University, Tehran, Iran
31- Department of Wood and Paper Science, College of Natural Resources and Environment, Science and Research Branch, Islamic Azad University, Tehran, Iran.
4Iran Polymer and Petrochemical Institute, P. O. Box: 14965/115, Tehran, Iran
5Assistant Professor, Science and Research Branch, Islamic Azad University, Tehran, Iran
چکیده [English]
Considering the increase of environmental pollutant resulted from agglomerating rubbish and wastes containing stable petroleum-based polymers, substitution of these polymers with bio-polymers and solving their problems and defects in the production process as well as the final products is an important topic. In this study, the possibility of the production of poly lactic acid (PLA)-rice husk composite with acceptable properties, and also the effect of using flame retardant mineral fillers of aluminum three hydrates (ATH) and magnesium di-hydroxide (MDH) on physical and thermal properties of the produced composite were investigated. Results indicated that the density of PLA-rice husk composite was higher than petroleum-based polymers composites (PP/HDPE-rice husk composites); and flame retardant mineral fillers addition led to an increase in the composite density. Also, flame retardant mineral fillers addition decreased the composite water absorption and thickness swelling, in a way that they were comparable with petroleum-based polymers composites. Results of thermal gravimetric analysis (TGA) showed that flame retardant mineral fillers addition also decreased the temperature of the composite weight loss curve peaks, and the weight loss rate toward temperature rising.